BESS Academyby Saksham Solar
← All modules
Module 4 of 10

Battery chemistries compared

LFP, NMC, lead acid, sodium ion and flow batteries: which one is right for you?

LFP (Lithium Iron Phosphate)

The default choice for buildings and factories in India today. Very safe, long life, no cobalt. Slightly heavier than NMC, which does not matter for a fixed installation.

NMC (Nickel Manganese Cobalt)

Lighter and more compact, used in many electric cars. Higher fire risk and shorter cycle life than LFP for stationary use.

Lead acid

The old inverter battery. Cheap to buy but lasts only 500–1,500 cycles and should only be emptied to 50%. Costs more over its life.

Sodium ion and flow batteries

Sodium ion is new, uses cheap materials and works well in heat. Flow batteries store energy in liquid tanks and suit very large, long-duration storage. Both are early in India.

ChemistryCostLife (cycles)SafetyWeightBest use
LFPMedium6,000–8,000Very highMediumHomes, societies, C&I
NMCMedium-high3,000–4,000MediumLightEVs, compact sites
Lead acidLow upfront500–1,500HighHeavySmall backup only
Sodium ionLow-medium3,000–5,000HighMediumHot climates, emerging
FlowHigh10,000+Very highVery heavyGrid scale, long duration

Real life example from India

A Kolhapur hospital replaced 400 lead acid batteries that needed changing every 3 years with one LFP system rated for 15 years, cutting replacement costs and floor space by two thirds.

Key takeaways

  • LFP is the safe, long-life default
  • Lead acid looks cheap but costs more over its life
  • Flow and sodium ion are for special cases today

Mini quiz

Get 2 out of 3 right to complete this module.

1. Which chemistry is the common default for BESS in buildings?
2. Lead acid batteries typically last:
3. Flow batteries are best for:

Ready to see what a battery can do for you?

Use our free calculator or ask a Saksham Solar expert to study your bills.

CalculateWhatsApp